Canon IR2800, IR3300, IR2200 manual Network, Ping, F05-701-02

CHAPTER 5 SERVICE MODE

COPIER>TEST>NETWORK

NETWORK

Use it to check the network-related items for connection.

PING

Caution

Use it to check the connection between machine and the network (TCP/IP only).

Use this mode when checking the connection to the network at time of in- stallation or when the connection to the network is faulty.

Display	I/O	Adjust	Function Option	Test	Counter
< NETWORK>			< 1/ 1 >	< READY>
PING			0 . 0 . 0 . 0
	Result(OK/NG)		IP address input
			+/-	OK
		F05-701-02

Using the Mode

1)Turn off the main power switch.

2)Connect the network cable to the machine, and turn on the main power switch.

3)Inform the user’s system administrator that the machine has been in- stalled, and ask him/her to set up the network.

4)Inform the system administrator that the network connection will be checked, and obtain the remote host address (IP address of the PC on the user’s network) for sending a PING.

5)Make the following selections: COPIER>TEST>NETWORK>PING. Then, enter the IP address obtained in step 4) using the keypad; and press the OK key.

• If the connection to the network is correct, ‘OK’ will be indicated. (End the work.)

• If ‘NG’ is indicated, check the connection for the network cable; if nor- mal, go to step 6). If a fault is found, connect the cable correctly, and go to step 5).

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 5-99 T