Canon IR2800, IR3300, IR2200 manual Opening/Closing of the Compartment, F08-104-01

CHAPTER 8 PAPER DECK-L1

1.4 Opening/Closing of the Compartment

1.4.1 Opening/Closing of the Compartment

When the deck open switch (SW100D) is pushed, the deck open solenoid (SL2D) goes ON, and the compartment is released; as a result, the compartment is pushed several centi- meters forward. At the same time, the deck lifter motor (M2D) starts to rotate, and the lifter inside the compartment moves down.

When the compartment is pushed inside the deck by hand, the deck open sensor (PS9D) will detect the light-blocking plate of the compartment, and the lifter will move up to the pickup position.

When the deck lifter motor starts to rotate, the deck open indicator (LED100D) on the open switch PCB will go ON or start to flash.

J20	Deck open signal		J5A
-1			- 4
SW100D	(DECK_OPEN_SW)
J20
	Deck open indicator LED ON signal		J5A
-4			- 1
LED100D	(LEDSW_LEDON)
Open switch PCB
	PS3D
(compartment)	Deck lifter upper limit detection signal -J5A9
	(LIFT_M_UPLMT)
	PS9D		J6
	Deck open detection signal		- 7
	(DECK_OPEN_SENS)
	SW1D		J7	Deck
	Deck open detection signal
			- 3	drive
	(DOPD*)
Deck lifter				PCB
		Deck open solenoid drive signal -J62
	SL2D	(DECK_LOCKOFF_SL_ON*)
	SW2D		J4
		Deck lifter lower limit detection signal - 7
		(DLLD)
Open		Deck lifter motor drive signal	J4
	M2D		-9,10
		9 : LIFT_M_UP
		(10 : LIFT_M_DOWN)
		F08-104-01

DC controller

PCB

(host machine)

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 8-9 P