Canon IR2200 manual Shift from Standby Mode to Sleep Mode, Shift from Sleep Mode 1 to Standby Mode

CHAPTER 2 MAIN CONTROLLER

4.4.1 Shift from Standby Mode to Sleep Mode 1

A shift from standby mode to sleep mode 1 is executed for the following:

•The power switch (soft switch) in the control panel is OFF.

•The machine remains in standby mode and a specific period of time (may be changed in user mode) has passed.

In addition, the following must be true:

•The setting of 'Function key wakeup ON/OFF' under 'Common settings' in user mode is set to 'ON'.

•The setting of 'Energy consumption in Sleep Mode' under 'Common settings' in user mode is set to 'high'.

•The setting of 'NetWare settings' under 'Network settings' in user mode is set to 'ON'.

•The setting of 'AppleTalk settings' under 'Network settings' in user mode is set to ON'.

•The setting of 'DHCP' under 'IP Address / TCP/IP settings' in user mode is set to use.

•A TokenRing board is installed.

•In the fax, timer transmission is selected.

•In the fax, an auto start job is selected.

•An extension of the fax is in use (engaged).

4.4.2 Shift from Sleep Mode 1 to Standby Mode

A shift from sleep mode 1 to standby mode is expected for the following:

•The power switch (soft switch) in the control panel is turned on.

2-16 S COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001