Canon IR2800 Connecting to the Network, Checking the Network Connection, Using the Ping Function

CHAPTER 3 INSTALLATION

2.10Connecting to the Network

Perform the following steps if the machine is equipped with printer func- tions:

1)Turn off the main power.

2)Connect the network cable to the machine, and turn on the main power.

3)Inform the user’s system administrator that the machine has been installed, and ask him/ her to make the network settings for the machine.

2.11Checking the Network Connection

Perform the following steps if the machine is equipped with printer func- tions:

If the user’s network environment is TCP/IP, use the PING function to make sure that the network PCB has properly been installed and the network settings have properly been made. If the user’s network environment is IPX/SPX or AppleTalk, on the other hand, these checks are not needed.

2.11.1 Using the PING Function

1)Make the following selections to select PING:

COPIER>TEST>PING>NETWORK.

2)Enter the IP address using the keypad on the control panel, and press the OK key.

3)Press the Start key.

•If PING is successful, ‘OK’ will be in- dicated: otherwise, ‘NG’ will be indi- cated.

<NETWORK>		< 1/1 >		<READY >
PING	0 .	0 .	0 .	0
Results (OK/NG)			IP address input
			+/-	OK

3-18 S COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001