COPYRIGHT
©
2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
5-58 T
4.2 FEEDER
DOCST Use it to adjust the original leading edge registration when the ADF is used.
• A higher setting decreases the leading edge margin.
• The data is stored on the ADF controller PCB.
Range of -10 to +10 (in 0.5 mm)
adjustment Using the Mode
1) Make a print of the Test Chart, and check the position of the image.
2) Select the item, and change the setting to adjust.
3) Press the OK key.
4) Make a print of the Test Chart once again, and check to make sure that
the image position is as indicated.
F05-402-01
LA-SPEED Use it to adjust the original feed speed in stream reading mode with the
ADF in use.
• A higher setting increases the speed.
• The data is stored on the ADF controller PCB.
Range of -30 to +30 (in 0.1%)
adjustment
Feed direction
Higher setting Lower setting
Print image
FEEDER>ADJUST