Canon IR2800 Orientation of the Deck Pickup/Feeding Roller, Removing the Deck Separation Roller

CHAPTER 8 PAPER DECK-L1

3.4.5Orientation of the Deck Pickup/Feeding Roller

When mounting the deck pickup/feeding

roller [1], be sure that the belt pulley [2] is toward the front of the machine.

The pickup/feeding roller rubber, on the other hand, may be attached to the pickup/ feeding roller shaft in either orientation.

[2]

[1]

3.4.6 Removing the Deck Separation Roller

1)Release the deck from its host machine; then, remove the two screws [1], and detach the separation roller support plate [2].

F08-304-07

[1]

[2]

		F08-304-08
2) Remove the joint [1], and detach the	[1]	[2]
deck separation roller [2].

F08-304-09

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 8-39 P