Canon IR2800, IR3300 Attaching the Timing Belt of the Multifeeder Tray, F05-902-08, F05-902-09

CHAPTER 5 PICK-UP/FEEDING SYSTEM

9.2.5 Attaching the Timing Belt of the Multifeeder Tray

1)	Butt the two rack plates [1] of the		[4]	[3]	[1]
	multifeeder tray against both ends (area	A
	A).
2)	Move the slide volume [2] in the direc-
	tion of B, and attach the timing belt [3]
	to the pulley [4].		B
		[1]	[2]		A
			F05-902-08

9.2.6 Checking the Image Rear Front Position

Make copies (from the Multifeeder Tray) in Direct, and check to make sure that the margin along the image front is 2.5 ± 1.5

mm.Otherwise, adjust the registration. (See item 9.2.7)

(-) (+)

2.5± 1.5mm

0

2

4

6

8

10

F05-902-09

9.2.7 Adjusting the Registration for the Multifeeder Rear Front

Execute ‘image read start position adjust- ment’ in service mode.

COPIER>FUNCTION>MF- ADJ-Y

Use it to adjust the image read start position.

If correction in service mode fails, make the following adjustments.

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 5-47 P