Canon IR3300, IR2800, IR2200 manual Registration roller fails to Rotate

CONTENTS

3.6	The copy is foggy (entire face)
	..............................................	4-13T
3.7	The copy is foggy (vertical) ..	4-14T
3.8	The copy has a black line (vertical,
	fuzzy, thick)	4-14T
3.9	The copy has a black line (vertical,
	fine)	4-15T

3.10The copy has a white spot (vertical)

.............................................. 4-16T

3.11The copy has a white line (vertical)

.............................................. 4-16T

3.12The copy has a white spot (horizon-

	tal)	4-17T
3.13	The back of the copy is soiled/
	Soiled edge	4-18T
3.14	The copy has a fixing fault ...	4-19T
3.15	The copy has a displaced leading
	edge	4-20T
3.16	The copy has a displaced leading
	edge (large margin)	4-20T
3.17	The copy has a displaced margin
	(no margin)	4-20T
3.18	The copy is blurred	4-21T
3.19	The copy is foggy (horizontal)
	..............................................	4-22T

3.20The copy has inadequate sharpness

.............................................. 4-23T

3.21The copy is completely blank

.............................................. 4-24T

3.22 The copy is completely black

.............................................. 4-26T

3.23The copy has a block/white dot af- ter replacement of the drum unit

..............................................	4-27T
3.24 The copy has a black line (stream
reading)	4-27T
4 Troubleshooting Malfunctions ....	4-28T
4.1 Power Supply System	4-28T
4.1.1 The AC power is absent ..	4-28T

4.1.2The DC power is absent

........................................	4-29T
4.2 Printer Unit	4-30T
4.2.1 Pickup fails	4-30T

4.2.2The lifter fails to move up (pickup from the cassette)

........................................ 4-31T

4.2.3The vertical path roller fails to

rotate 4-32T

4.2.4The registration roller fails to

rotate 4-32T

4.2.5Pickup from the multifeeder

tray fails (i.e., the pickup roller

fails to rotate) 4-33T

4.2.6Pickup from the multifeeder tray fails (i.e., the multifeeder holding plate fails to move up)

........................................ 4-33T

4.2.7The photosensitive drum fails to

rotate 4-34T

4.2.8The pre-exposure lamp fails to

go ON	4-34T
4.3 Reader Unit	4-35T

4.3.1The No. 1 mirror base fails to

move 4-35T

4.3.2The scanning lamp fails to go

ON	4-36T
4.4 Message Indication	4-37T

4.4.1The “Add Toner” message fails

to go OFF 4-37T

4.4.2The “Control Card Set” mes- sage fails to go OFF (when no

card reader is installed) ... 4-37T

4.4.3The “Add Paper” message fails

to go OFF 4-37T

4.4.4The “Close the Front Cover”

massage fails to go OFF ..	4-38T
4.5 Paper Deck	4-39T
4.5.1 Pickup fails	4-39T

4.5.2The deck lifter fails to move up

........................................ 4-40T

5 Troubleshooting Feeding Faults ...	4-41T
5.1 Paper Jams	4-41T
5.1.1 Pickup Assembly	4-42T

5.1.2Separation/Feeding Assembly

........................................ 4-43T

5.1.3Fixing/Delivery Assembly, Du- plex Reversing Assembly

........................................ 4-43T

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 T3