Canon Adjusting Service Mode Settings for IR3300 Copier

CHAPTER 5 SERVICE MODE

COPIER>ADJUST>ADJ-XY

<ADJ-XY>

Use it to adjust the image read start position.

If you have cleared the RAM on the reader controller PCB and replaced the PCB, use it to enter the settings indicated on the service label.

ADJ-X

Use it to adjust the scanner image leading edge (x direction).

Range of	250 to 290 (‘1’ being 0.1mm)
adjustment
Caution	Be sure to execute it before adjusting the margin.
	Do not use this mode to create a margin.
	Vertical side plate
		Copyboard glass
	Standard white plate
	Lower setting		Higher setting
	F05-401-03

ADJ-Y

Use it to adjust the CCD read start position (X direction).

Range of 100 to 400 (‘1’ being 0.1 mm)

adjustment

Lower setting
Higher setting	Read start position
Original

Vertical size plate

F05-401-04

5-46 T COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001