Canon IR2800, IR3300, IR2200 Basic Sequence of Operations at Power-On, F01-202-02, T01-202-01

CHAPTER 1 BASIC OPERATION

2 Basic Sequence of Operations

2.1 Basic Sequence of Operations at Power-On

	Power switch ON
	SREADY	STBY
Scanner HP sensor (PS39)
Scanning lamp (LA2)	*1	*2
Scanner motor (M3)	Forward Reverse

*1: Shading adjustment (gain adjustment) is executed 1 sec after the scanning lamp turns on.

*2: Shading adjustment (CCD original size detection slash level adjustment) is executed 1 sec after the scanning lamp turns on.

F01-201-01

2.2Basic Sequence of Operations in Book Mode

Start key ON

	SREADY	SCFW	SCRV	STBY
Scanner HP sensor (PS39)
Scanning lamp (LA2)	*1
			*2
Scanner motor (M3)	Forward Reverse
		Start position		Start position

*1: Shading correction (gain adjustment and CCD original size detection slash level adjust- ment) is executed for every job.

*2: Executed only at the end of a scan job.

		F01-202-02
Name of period			Description
SREADY(scanner ready)		From when the power switch is turned on to when shading ad-
		justment ends.
		Or, from when the Start key is turned on to when the scanner
		reaches scanner start position.
SCFW(scanner forward)		While the scanner is moving forward to scan the original.
SCRV(scanner reverse)		While the scanner is moving in reverse.
STBY(standby)		From when shading correction ends to when the Start key is
		turned on or when the power switch is turned off.
		T01-202-01
1-2 R	COPYRIGHT © 2001 CANON INC.		CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001