Canon IR3300, IR2800, IR2200 manual Body, Model-Sz

CHAPTER 5 SERVICE MODE

COPIER>OPTION>BODY

BODY

Use it to make machine-related settings.

MODEL-SZ
	Use it to select the mode of indication by destination and of the ADF origi-
	nal size detection.
Settings	0: AB (6R5E), 1: INCH (5R4E), 2: A (3R3E), 3: AB/INCH (6R5E)
FIX-CLN
	Use it to set fixing cleaning mode:
	•	During last rotation after the end of printing, the fixing assembly is ro-
	tated idly at 1/4 the fixing speed.
Settings	0: no cleaning (default)
	1: once per 500 sheets; temperature control at 225 °C , idle rotation for
	60 sec
	2: once per 200 sheets; temperature control at 225 °C , idle rotation for
	60 sec
	3: once per 100 sheets; temperature control at 225 °C , idle rotation for
	60 sec
	4: not used
	5: not used
FIX-TEMP
	Use it to select a fixing control temperature.
Settings	0: disable (default)
	1: place priority on productivity; keep control temperature constant: -
	10 °C
	2: keep control temperature constant: -6 °C
	3: keep control temperature constant: -3 °C
	4: place priority on fixing; keep control temperature constant: +3 °C
	5: keep control temperature constant: +6 °C
	6: keep control temperature constant: +10 °C
	7: keep control temperature constant: +15 °C
HUM-SW
	Use it to enable or disable the environment sensor.
Settings	0: auto control by environment sensor
	1: fixed mode (for high humidity)
	2: fixed mode (for normal humidity)
	3: fixed mode (for low humidity)
	(In 1, 2, or 3, the move of control does not depend on the environment
	sensor.)

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 5-83 T