Canon IR2800, IR3300, IR2200 manual Replacing the Drum Unit

CHAPTER 3 INSTALLATION

6 Replacing the Drum Unit

Work Checks/remarks

1)Turn off the main power switch; then, open the front cover.

2)Shift the feeding assembly releasing le- ver to free the feeding assembly.

3)Turn the developing assembly locking lever counterclockwise to free the de- veloping assembly.

4)Remove the fixing screw from the drum unit.

(The removed fixing screw will be used when mounting the new drum unit.)

5)Pull the drum unit straight out to the front.

6)Unpack the new drum unit, and detach the two releasing members of the pri- mary charging roller.

Tape

1. Do not touch the drum area to avoid scratching the photo- sensitive drum.

2.Do not expose the photosen- sitive drum to strong light.

3.Take care not to damage the stirs found on the bottom of the drum unit.

4.When removing the tape from the rear end of the drum unit, keep the rear end higher than the front cover to prevent spilling waste toner.

Primary charging roller releasing members

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 3-27 S