Canon IR3300, IR2800, IR2200 Removing the Charging Roller Solenoid SL6, F04-904-01 F04-904-02

CHAPTER 4 IMAGE FORMATION SYSTEM

9.4 Charging Roller Solenoid

9.4.1 Removing the Charging Roller Solenoid (SL6)

1)	Remove the photosensitive drum unit.
	(p. 4-28P)	[1]
2)	Open the rear cover. (7 screws)
3)	Remove the DC controller PCB. (p. 7-	[1]
	17P)
4)	Remove the four screws [1], and detach
	the DC controller base [2].
		[2]

[1]

5)Disconnect the two connectors [1] of the harness.

6)Remove the three screws [2], and shift the duct unit [3] to the side, and slide it out to the front.

F04-904-01

[2] [1] [1]

[3]

[2]

F04-904-02

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 4-31 P