Canon IR2800, IR3300, IR2200 manual Removing the Exposure Lamp, F02-501-01 F02-501-02 16 R

CHAPTER 2 ORIGINAL EXPOSURE SYSTEM

5.1 Exposure Lamp

5.1.1Removing the Exposure Lamp

•Do not start to work if the lamp is hot.

•Do not leave fingerprints on the surface of the lamp.

•Do not subject the lamp to impact.

•Do not touch the light win- dow of the lamp without a means of protection.

•Do not impose force on the lamp.

•If the surface of the lamp is soiled, dry wipe it.

1)Remove the copyboard glass. (p. 3-11R)

2)Remove the reader front cover (2 screws) and the reader rear cover (5 screws).

3)While taking care not to hold the scan- ning lamp [1] and the reflecting shade [2], move the No. 1 mirror base [3] as far as the cut-off in the frame.

4)Remove the three screws [4] from the No. 1 mirror base, and detach the scan- ning lamp [1] together with the cable fixing plate [5].

5)Remove the screw [1], and detach the connector cover [2] found at the rear.

[5]

[4]

[1]

[3]

[2]

[1] [4]

F02-501-01

[1] [2]

F02-501-02

2-16 R COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001