Canon IR2200, IR3300, IR2800 manual Connection, Preparing Boot ROM, F07-104-01

CHAPTER 7 UPGRADING

1.4.2 Connection

The following discussions assume the use of a network cable (cross cable).

Making Preparations

If you want to download firmware to the machine using a network, you need to set up the PC and the machine’s network environment.

Use TCP/IP as the communication protocol for downloading form a network using the Service Support Tool. Connect the PC to the machine by way of the network, and check to make sure that all are ready for communication by sending a PING command from the PC or the machine.

1)Connect the machine’s network connector (RJ-45) and the network connector of the PC using a network cable (cross cable).

2)Turn on the PC, and start up the Service Support Tool.

3)Connect the machine’s power plug to the power outlet, and start service mode; make the following selections: COPIER>FUNCTION>SYSTEM>DOWNLOAD. Then, click ‘OK’ so that the machine will be in download standby mode (notation “STNDBY”).

1.4.3 Preparing BOOT ROM

The discussions that follow assume upgrading an iR8500 (COPY model). 1) User ‘Downloading/Uploading’, select ‘To Next’.

F07-104-01

COPYRIGHT © 2001 CANON INC. CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001 7-15 T