149
Error messages
Display message Cause/solution
Base no power
or
No link to base.
Reconnect main base
AC adaptor.
RThe handset has lost communication with the base unit. Move
closer to the base unit and try again.
RUnplug the base unit’s AC adaptor to reset the unit. Reconnect
the adaptor and try again.
RThe handset’s registration may have been cancelled.
Re-register the handset (page 32).
Check Phone Line RThe supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 10).
Error RRecording was too short. Try again.
Invalid Number RYou tried to send an SMS message to a phone number saved
in the phonebook, caller list, or redial list that is over 20 digits
long.
Memory Full RThe phonebook memory is full. Erase unwanted entries
(page 20).
RMessage memory is full. Erase unwanted messages (page 40,
41).
RThe call barred list memory is full. Erase unwanted entries
(page 31).
Use rechargeable
battery.
RA wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 4, 7.
You must first
subscribe to Caller
ID.
RYou must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
48
Useful Information
TG7851_61FX(en)_0215_ver011.pdf 48 2013/02/15 18:28:14