Programmable settings
You can customise the unit by programming the following features using the handset.
To access the features, there are 2 methods.
nScrolling through the display menus
1MN (right soft key)
2Press MCN, MDN, MEN, or MFN to select the desired main menu. a MOKN
3Press MCN or MDN to select the desired item from the next sub-menus. a MOKN
4Press MCN or MDN to select the desired setting. a MOKN
RThis step may vary depending on the feature being programmed.
RTo exit the operation, press MeN.
nUsing the direct command code
1MN (right soft key) a Enter the desired code.
Example: Press MN (right soft key) #101.
2Select the desired setting. a MOKN
RThis step may vary depending on the feature being programmed.
RTo exit the operation, press MeN.
Note:
RIn the following table, < > indicates the default settings.
RIn the following table, indicates the reference page number.
RDisplay menu order and sub-menu may vary depending on your model.
Display the menu tree and direct command code table
Main menu: “Answer System”*1
Sub-menu 1 Sub-menu 2 Settings Code
Message List – – #329 40
Play New Msg. – – #323 40
Play All Msg. – – #324 40
Erase All Msg.*2 – – #325 41
Greeting Start REC*2
(Record greeting)
–#302 39
Play Greeting –#303 40
Default*2
(Reset to pre-recorded
greeting)
–#304 40
23
Programming
TG7851_61FX(en)_0215_ver011.pdf 23 2013/02/15 18:28:12