Answering system
Problem Cause/solution
The unit does not record
new messages.
RThe answering system is turned off. Turn it on (page 39).
RThe message memory is full. Erase unwanted messages
(page 40).
RThe recording time is set to “Greeting Only”. Change the
setting (page 43).
RIf you subscribe to a voice mail service, messages are recorded
by your service provider/telephone company, not your
telephone. Change the unit’s number of rings setting or contact
your service provider/telephone company (page 42).
I cannot operate the
answering system
remotely.
RThe remote access code is not set. Set the remote access code
(page 41).
RYou are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 41).
RThe answering system is turned off. Turn it on (page 42).
The unit does not emit
the specified number of
rings.
RIf the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Liquid damage
Problem Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
RDisconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Caution:
RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.
52
Useful Information
TG7851_61FX(en)_0215_ver011.pdf 52 2013/02/15 18:28:14