– pressing MeN at all other times.
Turning the power on/off

Power on

Press MeN for about 1 second.

Power off

Press MeN for about 2 seconds.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing M N (right soft key), #, and then
the corresponding code on the dial keypad
(page 23).
Example: Press MN (right soft key)
#101.
n Symbol meaning:
Example: MbN: “Off”
Press MCN or MDN to select the words in
quotations.
Important:
RWhen you install the batteries for the first
time, the handset may prompt you to set
display language and region setting.
Perform step 2 in “Display language”,
page 15, and then press MOKN.
Continue from step 2 in “Changing the
unit’s region setting/Resetting the base
unit”, page 31.

Display language

16 display languages are available.
1M N (right soft key) #110
2MbN: Select your desired language. a
MOKN
3MeN

Date and time

1MN (right soft key) #101
2Enter the current date, month, and year.
a MOKN
Example: 15 July, 2013
15 07 13
RYou can select the date format by
pressing #:
– dd/mm/yy (date/month/year)
– yy/mm/dd
3Enter the current hour and minute.
Example: 9:30
09 30
RYou can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
4MOKN a MeN
Note:
RThe date and time may be incorrect after a
power failure. In this case, set the date and
time again.

Dialling mode

If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
15

Getting Started

TG7851_61FX(en)_0215_ver011.pdf 15 2013/02/15 18:28:11