Intercom
Intercom calls can be made between
handsets.
Note:
RWhen paging the handset, the paged
handset beeps for 1 minute.
RIf you receive an outside call while talking
on the intercom, you hear 2 tones. To
answer the call, press MeN, then press
M N.
Making an intercom call
1MN (right soft key) a M N
2MbN: Select the desired unit. a MOKN
RTo stop paging, press MeN.
3When you finish talking, press MeN.
Answering an intercom call
1Press MN to answer the page.
2When you finish talking, press MeN.
Handset locator
You can locate a misplaced handset by
paging it.
1Base unit: Press MN.
RAll registered handsets beep for 1
minute.
2To stop paging:
Base unit: Press MN.
Handset: Press MeN.
Transferring calls,conference calls
Outside calls can be transferred or a
conference call with an outside party can be
made between 2 handsets.
1During an outside call, press MN to put
the call on hold.
2MbN: “Intercom” a MOKN
3MbN: Select the desired unit. a MOKN
4Wait for the paged party to answer.
RIf the paged party does not answer,
press MN to return to the outside call.
5To complete the transfer:
Press MeN.
RThe outside call is being routed to the
destination unit.
To establish a conference call:
MN a MbN: “Conference” a MOKN
RTo leave the conference, press
MeN. The other 2 parties can
continue the conversation.
RTo put the outside call on hold: MN
a MbN: “Hold” a MOKN
To resume the conference: MN a
MbN: “Conference” a MOKN
RTo cancel the conference: MN a
MbN: “Stop Conference” a MOKN
You can continue the conversation
with the outside caller.
Answering a transferred call
Press MN to answer the page.
45
Intercom/Locator
TG7851_61FX(en)_0215_ver011.pdf 45 2013/02/15 18:28:14