2MbN: “Edit Message” a MOKN
3Continue from step 3, “Writing and
sending a new message”, page 36.
Erasing received messages
1While reading a received message, press
MN.
2MbN: “Erase” a MOKN
RTo erase all messages, select “Erase
All”. a MOKN
3MbN: “Yes” a MOKN a MeN
Storing the sender’s number in
the phonebook
1While reading a received message, press
MN.
2MbN: “Add Phonebook” a MOKN
3To store the name, continue from step 3,
“Adding entries”, page 20.
Editing the sender’s number
before calling back
1While reading a received message, press
MN.
2MbN: “Edit & Call” a MOKN
3Edit the number. a MN
Other settings
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the phonebook or redial list, the PBX
line access number is deleted. The default
setting is “Off”.
1MN (right soft key) #356
2MbN: “On” a MOKN
3Enter your PBX line access code and a
dialling pause, if necessary. a MOKN a
MeN
38
SMS (Short Message Service)
TG7851_61FX(en)_0215_ver011.pdf 38 2013/02/15 18:28:13