Brother PR-620 operation manual Using the Optional Bobbin Winder, Precautions, 188

APPENDIX —————————————————————————————————————————————————————

Using the Optional Bobbin Winder

When winding the bobbin thread onto a metal bobbin, use the optional bobbin winder. The procedures for using the optional bobbin winder are described below.

Precautions

For precautions concerning the power supply, refer to page 14.

CAUTION

●Be sure to place the bobbin winder on a level, stable surface.

●Only use the bobbins supplied with this bobbin winder.

Optional bobbin winder and its accessories

Check that the following bobbin winder and accessories are enclosed.

1. 3 2 2. 3. 4.

4

5

5.

1

9.

1 Main power switch	6.	7.	8.
2 Bobbin winder shaft

3Hole for thread guide

	4 Hole for spool pin				10.
	5 DC input connector
No.	Name	Parts Code	No.	Name	Parts Code
					X59354-151(UK)
					LN2284-001
1	Bobbin winder	XC6598-051	6	Power supply cord	(USA/CANADA)
					XA0070-151(Europe)
					XC9548-051
					(Australia)
2	Spool pin	XC5949-051	7	Metal bobbins (5)	100376-053
3	Spool cushion	XA0679-050	8	Spool cap	130012-054
4	Thread guide	XC6644-051	9	Weight (L)	XC5974-151
5	AC adapter	XC6643-051	10	Weight (S)	XC6631-051
		XD0318-051(Europe)

* The parts code of the bobbin winder set may differ depending on the area where the machine was purchased.

188