Brother PR-620 Editing the Embroidery Pattern Embroidering Settings Screen, If necessary, touch

Editing the Embroidery Pattern (Embroidering Settings Screen)

In the embroidering settings screen, a single pattern can be edited if patterns were not combined or an entire combined pattern can be edited as a single pattern.

In addition, the arrow keys can be used to move the pattern in the pattern editing screen or move the embroidery frame in the embroidering settings screen. Touching these keys moves the embroidery frame.

Rotating the entire pattern

The entire pattern can be rotated.

1Touch .

XThe screen shown below appears.

1Enables the entire pattern to be rotated.

2 Enables the embroidery frame to be moved.

3 Enables the embroidering area to be checked.

4 Touch this key to close this screen.

2Touch the keys to adjust the pattern to the desired angle.

For more details, refer to page 122.

3If necessary, touch the arrow keys to adjust

the position of the embroidery frame.

For more details, refer to page 72.

If necessary, touch	to check the
4embroidering area.

For more details, refer to page 32.

5After making the desired changes, touch

.

XThe embroidering settings screen appears again.

Memo

●If is touched to return to the pattern editing screen after the entire pattern is rotated, the pattern appears as it did before the rotation angle was specified, but the setting is not cancelled. When the

embroidering settings screen is displayed	5
again, the pattern appears with the rotation
angle applied. However, if an error occurs,
for example, if the pattern is enlarged in the
pattern editing screen so that it extends out
of the embroidering area when it is rotated,
the following error message appears.

1Touch to return to the pattern editing screen so that the pattern can be re-edited.

Editing the Embroidery Pattern (Embroidering Settings Screen) 129