Brother PR-620 operation manual 3Secureframe. the stabilizer with the pins on the cap

2Release the snap lock on the advanced cap frame down and then disengage the latch. Open the clamping frame. Also, open brim presser.

3

2

1

1Snap lock released

2Clamping frame opened

3 Brim presser

3Secureframe. the stabilizer with the pins on the cap

1

1Pins

•Make sure that the pins go through the stabilizer to firmly secure it.

4Lift up (flip) the sweat guard on the inside of the cap, and then place the cap in the advanced cap frame.

Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim.

1Edge of the lower frame

2 Sweat guard

3 Base of the brim

At the same time, align the centerline of the cap with the centerline of the sweat guard holder on the advanced cap frame, and then slide the sweat guard under the sweat guard holder.

1Sweat guard holder

2Centerline of sweat guard holder

3 Centerline of cap

5Align the centerline of the cap with the notch in the mounting jig.

1

2

1Centerline of cap

2Notch in mounting jig

Place the sweat guard of the cap inside the	7
6notch in the cap frame.

1

1Notch in cap frame

Using the Optional Cap Frame 181