Brother PR-620 operation manual 8Slideplace.the bobbin holder, until it clicks into

5Pass the thread through the hole in the right of the thread guide toward the back of the machine.

1

1Hole in the thread guide

6Wind the thread clockwise around the bobbin 4 or 5 times, as shown in the illustration.

7Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread. The cutter will cut the thread.

2

1

1Guide slit

2Bobbin winder seat

Note

●Be sure to follow the procedure described. If the bobbin is wound without the thread being cut with the cutter, when the bobbin thread runs low, the thread may become tangled around the bobbin and cause the needle to break.

8Slideplace.the bobbin holder, until it clicks into

1

1Bobbin holder

9Press the main power switch to start winding the bobbin.

X Start winding the bobbin. 7

Using the Optional Bobbin Winder 191