Brother PR-620 operation manual Sewing a pattern aligned with a mark on the fabric

6Touch (unlock key), and then press the start/stop key to begin embroidering.

7Correct thread tension. From the wrong side of the fabric, the bobbin thread should be about one third of the stitch width.

Note

●If adjustment is necessary, refer to instructions on page 45 or 85/86.

Sewing a pattern aligned with a mark on the fabric

By specifying the beginning of stitching and the end of stitching, the exact position of the pattern can be checked.

For example, when sewing text along a line in the fabric pattern, the beginning of the stitching can be set in the lower-left corner so that the position can be checked, and then the beginning of stitching can be reset. Next, the beginning of stitching can be set in the lower-right corner to check the position. The straight line connecting the first point and the second point is the baseline for the text. If the baseline that the text follows leaves the fabric pattern, the embroidering position can be adjusted.

1Touch in the embroidering settings screen.

2Setcorner.the beginning of stitching in the lower-left

7

XThe frame moves so that the needle drop point aligns with the beginning of stitching.

Helpful Tips for the Operation of the Machine 161