Brother PR-620 Changing the colors of the pattern, Change thread color screen appears

Changing the colors of the pattern

The colors of the pattern can be changed and previewed on the screen.

By changing the colors of the pattern, the same pattern can be viewed in various ways.

If your thread colors are registered in a color thread table and if you used the table for changing color, the thread spools can be assigned with the thread colors that you have. And the pattern displayed in the screen will appear with colors that are almost the same as the actual thread colors

With this operation, the colors of all patterns will be changed, not just those of the pattern being edited.

1Touch .

XThe change thread color screen appears.

1The part of the pattern in the color at the top of the thread color sequence display is the part whose color is being changed.

2Shows the number of thread color changes. The top value shows the position in the sewing order for the color at the top of the thread color

sequence display and the bottom value shows the total number of thread color changes.

3Selects the previous color in the thread color sequence display

4Selects the next color in the thread color sequence display

5Use these keys to select a color from the color

thread table.

6Applies the color change

7Color thread table

Select a color from this table.

8Specifies pause locations (Refer to “Specifying pause locations before embroidering” on page 92.)

9Touch this key to close this screen.

0 Name of the table

2Touch and until the color to be changed appears at the top of the thread color sequence display.

1The thread color for the part of the pattern displayed at the top will be changed.

3Touch , , and to select the new color from the color palette.

5

1The color that appears enlarged is the color that is selected.

2Displays the name of the selected thread color

XIn the pattern display area, the color of the selected part of the pattern is changed.

Editing the Embroidery Pattern (Pattern Editing Screen) 127