Brother PR-620 operation manual Cleaning around the needle plate, 194

APPENDIX —————————————————————————————————————————————————————

3Use the included cleaning brush to remove any lint and dust from the hook and its surrounding area.

CAUTION

●If the hook is scratched or damaged, consult your authorized dealer.

4After cleaning is finished, insert the bobbin case into the hook, and then close the hook cover. (Refer to page 19.)

Cleaning around the needle plate

If lint and dust collect around the moving knife, the fixed knife or the thread retaining plate, the thread may not be cut correctly or various parts of the machine may be damaged. Make sure to clean around the needle plate once a month.

Use on offset screwdriver and the included cleaning brush.

1Turn off the embroidery machine.

CAUTION

●Unplug the power supply cord before cleaning the machine, otherwise injuries or an electric shock may occur.

2Remove the needle plate.

With an offset screwdriver, loosen the screws, and then remove the needle plate.

1

1Needle plate

194