Brother PR-620 operation manual Moving the needle bar to be threaded to the sewing position

EMBROIDERING TUTORIAL ——————————————————————————————————————————————

3Passfoot.the thread under the guide on the presser

1

2

1Guide on presser foot

2Notch in guide on presser foot

•Make sure that the thread securely passes through the notch in the guide on the presser foot.

4Securely pass the thread through the groove in the thread cutter, and then lightly pull the thread to cut it.

1

1Groove in thread cutter

Note

●If the thread is not correctly passed through the groove in the thread cutter, the message “Wiper error.” appears and the needle cannot be threaded. Be sure to securely pass the thread through the groove.

●If enough thread is not pulled out, the thread cannot be pulled through the thread cutter.

5Press the automatic needle-threading button.

•The threader moves back away from the needle. The thread is pulled through the needle eye.

•The wiper comes out and catches the thread between the needle and the threader.

•The threader goes back to the original home position.

This completes the upper threading for needle bar 1.

Thread the remaining needle bars in the same way. However, if the needle bar to be threaded is not moved to the embroidery position, the needle cannot be threaded with the automatic needle-threading mechanism. For the remaining needle bars, perform the following operation to move the needle bar to the embroidery position before trying to thread the needle.

■Moving the needle bar to be threaded to the sewing position

1Touchto thread.the key for the needle bar that you wish

XThe selected needle bar moves to the embroidery position.

40