Brother PR-620 operation manual Using the Optional Cap Frame, Cap frame and its accessories

Using the Optional Cap Frame

By using the optional cap frame, patterns can be embroidered onto caps and hats. The procedures for using the cap frame are described below.

Cap frame and its accessories

The cap frame driver and the mounting jig are required in order to use the cap frame.

Cap frame

1Embroidering area:

50 mm (H) × 130 mm (W)

(2 inches (H) × 5-1/8 inches (W))

2The mark indicates the center of the embroidering area.

3 Snap lock <Standard type>

1

2

3

<Advanced type>

1

2

3

Cap frame driver and 4 thumb screws

In order to attach the cap frame to the carriage, remove the embroidery frame holder, and then attach this cap frame driver to the carriage of the machine.

1 Insert the thumb screws into these holes and tighten the screws to secure the movable section. Use these holes when storing this cap frame driver.

2Holding Spring

The cap frame is secured by the two holding Spring.

Mounting jig
Use when framing a cap in the		1
cap frame.
1 Holders
The cap frame is secured by
the two holders.
2 Mounting bracket
Tighten thumb screw to
secure to mounting surface.	3
3 Screws		2
Adjust the size of the
mounting jig according to the
type of cap being
embroidered.

PadAllen screwdriver (large)Allen screwdriver (medium)

* Use when adjusting the ring of the cap frame driver and the height of the L-shaped bracket. (Refer to page 173.)

Memo

●Before installing the cap frame, be sure to adjust the ring of the cap frame driver and the height of the L-shaped bracket. (If the same machine is being used, this adjustment is only required the first time that it is used. In addition, this adjustment is not necessary if the enclosed cap frame is installed.)

●After the ring of the cap frame driver and the height of the L-shaped bracket have been adjusted, they must be adjusted again if a different machine is being used. The height may differ depending on the machine that is used. For details, contact your sales representative.

Note

●If the cap embroidery frame is attached, the embroidery frame indicators, showing which embroidery frames can be used, appear as shown below.

7

Using the Optional Cap Frame 169