Brother PR-620 operation manual Understanding the screens, Turning on the Machine

Understanding the screens

When the machine is turned on and is touched, the pattern type selection screen appears. The operations described below will be entered using the operation panel. For precautions concerning the use of the touch panel, refer to page 16.

The screen that appears the next time that the embroidery machine is turned on differs depending on how the machine was previously turned off. (Refer to page 62.)

No.	Display	Key Name	Function	Reference
				Page
1		Settings key	Touch this key to change the embroidery machine settings.	p. 140
		Machine
2		operations guide	Touch this key to check a machine operation.	p.151
		key
3		New embroidery	Cancels all operations previously performed and returns to
		key	the initial pattern group selection screen.
			When a problem occurs, for example, there is an operating
4		Help key	procedure that you do not know, touch this key to view	p. 153
			solutions.
			This area displays the selected pattern. The line 6 shows the
		Pattern display	embroidering area for the extra-large embroidery frame. The
5			embroidery frame indications, the grid lines and other	p. 143
		area
			display settings can be specified from the machine settings
			screen.

*The keys in the table above appear and can be used in most of the screens described later in this manual. The settings key cannot be used in the embroidering settings screen.

2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Turning ON the Machine 21