Brother PR-620 Adjusting the angle, Changing the Embroidering Position, Needle bar is unlocked

2Touch the arrow keys in the embroidery settings screen to move the embroidery frame so that the needle drop point is at the center of the area where you wish to embroider.

•When specifying the starting of stitching, align the needle drop point with the point specified as the starting of stitching. (For details on specifying the starting/ending of stitching, refer to page 89.)

■Unlocking the needle bar

1Display the embroidering screen, and then touch the key for any needle bar other than the one that is locked.

XThe needle bar is unlocked.

Adjusting the angle

Depending on the type of fabric being embroidered, it may not be possible to stretch the fabric in the embroidery frame at the desired angle. In this case, adjust the angle of the pattern so that it is correctly positioned on the fabric.

1Touch .

3

The screen shown below appears.

Example: Original angle

1 Rotates 90 degrees to the left

2Rotates 10 degrees to the left

3Rotates 1 degree to the left

4 Rotates 90 degrees to the right

5Rotates 10 degrees to the right

6Rotates 1 degree to the right

7Touch this key to return the pattern to its original angle.

8Moves the pattern in the direction of the arrow on the key.

9Enables the embroidering area to be checked

0Touch this key to close this screen.

Changing the Embroidering Position 73