Brother PR-620 operation manual Other Basic Procedures

3OTHER BASIC PROCEDURES

This chapter provides explanations on operations other than those described in chapter 2, such as sewing a pattern with seven or more colors, changing the needles and changing thread spools.

Resume the Operation Being Performed Before the Machine Was Turned OFF		62
Changing the Needle		63
Replacing the needle / 63
Correctly Using the Embroidery Frames		65
Embroidery frame types and applications / 65
Attaching Iron-On Stabilizer (Backing) to Fabric		66
Hooping the Fabric		67
Hooping the fabric in the extra-large and large embroidery frames / 67
Using the embroidery sheet / 68	Large/small pieces of fabric / 69
Embroidery Frame Position and Movement		70
Changing the Embroidering Position		72
Adjusting the angle / 73
Embroidering a Pattern Containing Seven or More Colors		75
Checking if thread spool changes are necessary / 75
Changing the Thread Spools with Designs of Seven or More Colors		77
Change thread spools message / 77	Easily changing the thread spools / 78
If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering		79
If the upper thread breaks / 79	If the bobbin thread breaks or runs out / 80
Embroidering From the Beginning or Middle of the Pattern		81
Resume Embroidering After Turning OFF the Machine		83
Adjusting the Thread Tension		85
Adjusting the tension of the bobbin thread / 85
Adjusting the tension of the upper thread / 86