Brother PR-620 operation manual Embroidery cards optional, 112, Deleting embroidery data

SELECTING/EDITING/SAVING PATTERNS ————————————————————————————————————————

■Deleting embroidery data

From this screen, the embroidery data stored in the machine’s memory can be organized by deleting unnecessary data.

After selecting the pattern that you wish to delete,

touch to display the screen shown below.

1Permanently deletes the data from the memory, then returns to the data with no pattern selected.

2Does not delete the data, then returns to the

screen before was touched.

3Touch .

This confirms the pattern selection.

XThe pattern editing screen appears.

Embroidery cards (optional)

1Insert the embroidery card into the machine’s embroidery card slot.

With the side of the embroidery card marked with an arrow facing toward you, fully insert the card into the embroidery card slot on the right side of the operation panel.

Note

●Only insert or remove embroidery cards

while appears in the display or while the embroidery machine is turned off.

●Make sure that the embroidery card is inserted with the side marked with the arrow facing toward you, do not insert the card with extreme force, and do not insert any object other than embroidery cards into the slot, otherwise the machine may be damaged.

●If an embroidery card other than our original embroidery cards are used, the embroidery machine may not operate correctly. Be sure to use only recommended embroidery cards.

●Some licensed or copyright cards may not be compatible with this embroidery machine.

●Please refer to page 5 for a list of compatible cards.

112