Brother PR-620 operation manual Make sure that the spool stand is opened in the shape of a

6 5 4 3 2 1

EMBROIDERING TUTORIAL ——————————————————————————————————————————————

The numbers indicate the thread path for each of the numbered needle bars. Be very careful to correctly thread the needle bars.

61

52

	4	3		6	1
6	5	2	1

6

5

4

1	5	2
2
3	4	3

1Place on spool pin 1 the spool of thread with the color (lime green) specified for needle bar 1.

•Make sure that the spool stand is opened in the shape of a V.

•When using small spools of thread, be sure to place the enclosed spool mat on the spool pin before placing the spool on the pin.

•Use spool cap on all spools of thread shorter than the height of the spool pin.

2Pass the thread through the number 1 hole in the thread guide just above the spool, and then pass the thread through the number 1 hole in the thread guide toward the front of the machine.

2

1

1Number 1 hole in the thread guide above the spool

2Number 1 hole in the thread guide toward the front of the machine

1Spool mat

2 Small spool

3 Spool cap

36