Brother PR-620 operation manual Types of caps, 170

APPENDIX —————————————————————————————————————————————————————

Types of caps

With the machine, we recommend that the following types of caps be embroidered.

■Standard(Pro Style)

Face: Pro style 6 sections

Otto Interna-
tional, Inc. cap	OTTO27-007
model number
(Example)
Mesh backing on
the back of front	Constructed	Unconstructed
panels	firm front	soft crown
(soft or hard)
Ease of framing	Easy	Fairly easy
(hooping)	(Recommended)
Backing	1 to 2 ply	2 to 3 ply

■Low Profile (Low fitting)

Face: Low fitting 6 sections

Otto Interna-
tional, Inc. cap	OTTO23-225	OTTO18-203
model number
(Example)
Mesh backing on
the back of front	Constructed	Unconstructed
panels	firm front	soft crown
(soft or hard)
Ease of framing	Very difficult
	(because the	Fairly easy
(hooping)	cap material
	very hard.)
Backing	1 to 2 ply	2 to 3 ply

■Golf Style

Face: Not divided 5 sections

Otto Interna-
tional, Inc. cap	OTTO23-225
model number
(Example)
Mesh backing on
the back of front	Constructed
panels	firm front
(soft or hard)
Ease of framing	Fairly easy
(hooping)
Backing	1 to 2 ply

Memo

●Check if this area 1 is covered with mesh.

Note

●There is no centerline that can be used as a guide for placing the cap in the cap frame. Before framing the cap, use a charcoal pen to mark the centerline.

170