Brother PR-620 operation manual Setup location, Setting Up the Machine

Setup location

Setup the machine in a location that meets the following requirements.

• Position machine more than 50 mm (2 inches) from the wall

• Allow sufficient space around the machine		1
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk
• Use a surface that can support the weight of the machine (about 37 kg (81 Ibs.))
• Allow open space around the ventilation slots at the bottom toward the back
		More than
		50 mm
		(2 inches)
		589 mm
770 mm		(23-3/16 inches)
(30-5/16 inches)
		More than
		350 mm
		(13-3/4 inches)
More than	512 mm	More than
250 mm	(20-5/32 inches)	250 mm
(9-7/8 inches)		(9-7/8 inches)

CAUTION

●In order to prevent malfunctions or damage, do not set up the machine in a location exposed

to the following conditions.

Direct sunlight	Liquids, such as water
	Extreme dust

Blocked ventilation slots

Objects within the moving range of the embroidery frame

Insufficient space

Connection to extension cords or multiple adapters

An unstable surface

Extremely high or extremely low temperatures (The operating environment should be between 5 °C (40 °F) and 40 °C (104°F)

Note

●For your safety: Since the machine weighs approximately 37 kg (81 lb.), do not set it up on an unstable table or desk.

Setting Up the Machine 7