63230-300-212 April 2001

Setting Up I/Os

Chapter 3—Operation

Configuring the Circuit Monitor Using The Setup Menu

To set up an I/O, you must do the following:

1.Install the I/O option module following the instructions provided with the product.

2.Use the display to select which IOX option is installed.

3.Use the display to configure each individual input and output. You can also use SMS to configure inputs and outputs.

NOTE: After selecting which IOX option is installed, you can’t configure the module until you have saved the changes. After saving the changes, you then can configure the inputs and outputs.

Selecting I/O Modules

For a description of I/O options, see Chapter 5—Input/Output Capabilities

 

on page 69. To view the status of an I/O, see “Viewing I/O Status” on page

 

43. You need to know the position number of the I/O to set it up. See “I/O Point

 

Numbers” on page 186 to determine this number. To set up an I/O, follow

 

these steps:

 

1.

From the Main Menu, select Setup.

 

 

The password prompt displays.

 

2.

Select your password. The default password is 0.

 

 

The Setup menu displays.

SETUP

Date & Time

Display

Communications

Meter

Alarm

I/O

Passwords

3.Select I/O.

The I/O Setup menu displays.

I/O

KYZ

I/O Extender

NOTE: Other option modules will be displayed in the I/O menu if they are installed

4.Select the I/O option that you have installed. In this example, we selected the I/O Extender.

© 2001 Schneider Electric All Rights Reserved

23

Page 35
Image 35
Schneider Electric 4000 Setting Up I/Os, Setup, Date & Time Display Communications Meter Alarm Passwords, Kyz, Extender