Power Analysis Values | Schneider Electric 4000 manual

Chapter 4—Metering Capabilities	63230-300-212
Power Analysis Values	April 2001

Table 4–5: Power Analysis Values

Value				Reportable Range

THD—Voltage, Current
3-phase, per-phase, neutral				0 to 3,276.7%

thd—Voltage, Current
3-phase, per-phase, neutral				0 to 3,276.7%

Total Demand Distortion				0 to 10,000

K-Factor (per phase)				0.0 to 100.0

K-Factor Demand (per phase)				0.0 to 100.0

Crest Factor (per phase)				0.0 to 100.0

Displacement P.F. (per phase, 3-phase)				–0.010 to 1.000 to +0.010

Fundamental Voltages (per phase)
Magnitude				0 to 1,200 kV
Angle				0.0 to 359.9°

Fundamental Currents (per phase)
Magnitude				0 to 32,767 A
Angle				0.0 to 359.9°

Fundamental Real Power (per phase, 3-phase)				0 to 32,767 kW

Fundamental Reactive Power (per phase)				0 to 32,767 kVAR

Harmonic Power (per phase, 3-phase)				0 to 32,767 kW

Phase Rotation				ABC or CBA

Unbalance (current and voltage)				0.0 to 100.0%

Individual Harmonic Magnitudes				0 to 327.67%

Individual Harmonic Angles				0.0° to 359.9°

Distortion Power				–32,767 to 32,767

Distortion Power Factor				0 to 1,000

Readings are obtained only through communications.
K-Factor not available at 400Hz.

Harmonic magnitudes andanglesthroughthe63rd harmonic at 50Hz and 60Hz; harmonic magnitudes and angles through the 7th harmonic at 400Hz.

68	© 2001 Schneider Electric All Rights Reserved

Image 80

Schneider Electric 4000 manual Power Analysis Values, Value Reportable Range

Contents

April Retain for future use Please Note Class a FCC Statement Contents Running the Diagnostics Wiring Error Test Power Factor Min/Max Conventions VAR Sign ConventionsWire Pulse Initiator Analog Input Example Waveform and Event Capture AlarmsLogging Appendix B-USING the Command Interface Disturbance Monitoring Glossary Index Schneider Electric All Rights Reserved List of Figures Figure A-1 Bits in a register 128 List of Figures 63230-300-212 April Viii List of Tables Summary of Circuit Monitor Instrumentation List of Tables 63230-300-212 April Chapter Contents Introduction What is the Circuit MONITOR? Advanced featuresFrom the display or remotely using software. -1summarizes Readings available from the circuit monitor Accessories and Options for the Circuit Monitor Circuit Monitor Parts, Accessories, and Custom Cables63230-300-212 Introduction April Description Part Number Document Number This Bulletin FeaturesTopics not Covered Firmware Introduction FirmwAre Introduction 63230-300-212 FirmwAre April Safety Precautions Safety Precautions 63230-300-212 April Advanced features not accessible from the display Operation Meters Resets Min/Max Setup View Alarms Diagnostics Operating the DisplayMain Menu How the Buttons Work Display Menu Conventions DisplayLanguage English Date MM/DD/YYYY Main Menu Overview Operation 63230-300-212 Main Menu Overview April 63230-300-212 Operation April Configuring the Circuit Monitor Using the Setup MenuSetting Up the Display Factory Defaults for the Display Settings Setting Up the Communications Infrared Port Options for Communications SetupCommunications Setting Up the Metering Functions of the Circuit Monitor Ethernet Communications Card ECC SetupMeter 3Ø4W3CT Options for Meter Setup 3Ø4W4CT2PT Operation 63230-300-212 Setting Up AlarmsAlarm from the display Create the custom alarm Setup and enable the new alarmPerforming two steps Create Custom Alarm Parameters Options for Creating an AlarmLbl Over THD Vbc Type Val Qty THD Dropout setpoints Follow these instructions to set up or edit an alarmFrom the Main Menu, select Setup Alarm Edit Parameters Options for Editing an Alarm Setting Up I/Os SetupDate & Time Display Communications Meter Alarm Passwords KYZ Extender Setup IOX Select ModulesCustom DI120AC Configuring I/O Modules DescriptionsOutputs for the I/O module you selected Name Description Input/Output Capabilities on I/O Extender Setup selection menu displaysIOX Custom Setup Setup Diagnostics Engy/Dmd Reset Min/Max Reset Setting Up PasswordsPasswords Advanced Setup Features Creating Custom Quantities to be Displayed Select a custom quantity Select Display Display Setup menu displaysCustom Quant Setup Option Available Values Default Options for Custom Quantities 28 for instructions Select Custom Screen Custom Screen Setup screen displaysCustom Screen Setup Screen Screen Blank LineMonthly Energy Cost Blank Line Screen Monthly Energy Cost Blank Line Available Default Quantities Quantity Type Q Label Q Viewing Custom Screens Advanced Meter Setup Monthly Energy Cost Dollars Select Meter Meter Setup screen displays Advanced Meter Setup 10 Options for Advanced Meter Setup ABC Resetting MIN/MAX, DEMAND, and Energy Values Main Menu ResetsReset Energy Reset Demand Reset MIN/MAX Accumulated Power Demand Min/Max Amp Demand Operation 63230-300-212 Viewing Metered Data April Menus where you can view metered data in real timeViewing Metered Data Current Voltage Frequency Power Power Factor Viewing Minimum and Maximum Values from the Min/Max MenuMIN/MAX Current a Mn 01/22/2000159A Mx 01/22/2000815A Viewing Alarms Meters Min/Max View Alarms Display Resets Setup DiagnosticsView Alarms Active Alarms List High Priority Log Viewing Active Alarms Active Alarms List 1/1View and Acknowledging High Priority Alarms High Priority Alarms Digital Outputs Kyzoff Viewing I/O StatusDigital Inputs Analog Inputs Digital Outputs Analog Outputs Diagnostics Reading and Writing RegistersREAD/WRITE Regs Reg Hex Dec 1003 000A Performing a Wiring Error Test 10 Wiring Error Test option on the Diagnostics menu Running the Diagnostics Wiring Error Test Meter Information Perform Test 12 Wiring Error Messages Message Description I2 load current less than 1% CT Operation 63230-300-212 Performing a Wiring Check April Metering Capabilities Circuit monitor REAL-TIME Readings MoreReadings One-Second, Real-Time Readings Samples 63230-300-212 Metering Capabilities April MIN/MAX Values for REAL-TIME Readings100 ms Real-Time Readings Power Factor Min/Max Conventions Included with the softwareTo +0 on the same scale Positive in this case Convention, refer to Advanced Meter Setup on Reactive PowerReal ALT CM1 VAR Sign Convention IEEE/IEC VAR Sign Convention Demand Readings Demand readings and their reportable rangesDemand Readings Metering Capabilities 63230-300-212 Demand Readings April Block Interval Demand Demand Power Calculation MethodsApril Demand Readings Block Interval Demand Examples Demand Current Demand VoltageBlock Interval Demand on April Demand Readings Synchronized Demand Interval Thermal DemandMinutes for illustration purposes Peak Demand Generic Demand Input Pulse Demand Metering Channel pulse metering example For all channels See Appendix A-Abbreviated Register Listing on page 127 for Energy ReadingsEnergy Readings Real Power April Energy Readings Power Analysis Values On page 68 summarizes the power analysis valuesHarmonic distortion 100% Harmonic Power = Overall Power April Power Analysis Values Power Analysis Values Value Reportable Range INPUT/OUTPUT Capabilities On page 3 of this bulletin Options I /O Extender OptionsInput/Output Capabilities 63230-300-212 Options April Extender Options Command interface Digital Inputs Demand Synch Pulse Input 59 in -Metering Capabilities for more about demandCalculations To verify peak demand charges 63230-300-212 Input/Output Capabilities April Analog Inputs Analog InputsMaximum value for each analog input Has been configured as follows Analog Input ExampleSample register readings for analog inputs Input/Output Capabilities 63230-300-212 Analog Inputs April Relay Output Operating Modes NormalLatched April Relay Output Operating Modes End Of Power Demand Interval TimedAbsolute kWh Pulse Absolute kVARh Pulse Mechanical Relay Outputs SOLID-STATE KYZ Pulse Output Setpoint-controlled Relay Functions Wire Pulse Initiator Application Calculating the KILOWATTHOUR-PER-PULSE Value Analog Outputs Register Reading kW Output Current mA Analog Output ExampleSample register readings for analog output Alarms Alarms 63230-300-212 About Alarms April About AlarmsAlarms Groups Setpoint-Driven Alarms Define the following informationPickup Setpoint Seconds, 100 ms increments, or cycles Pickup Setpoint Dropout Setpoint Pickup Delay Dropout DelayAlarm Period Priorities Alarm Levels Alarms About Alarms Custom Alarms SETPOINT-CONTROLLED Relay Functions Alarms 63230-300-212 Custom Alarms April 63230-300-212 Alarms April Types of Setpoint-Controlled Relay FunctionsUndervoltage Overvoltage Phase Loss-Current Phase Loss-VoltageReverse Power Phase Reversal Settings Scale Factors on page 191 in Appendix B-Using the CommandScale Factors Setpoint Scaling Alarm Setpoints Alarms 63230-300-212 Scaling Alarm Setpoints AprilScale groups and their register numbers Scale Group Register Numbers Alarm Conditions and Alarm Numbers List of Default Alarms by Alarm Number Alarm Alarm Description Abbreviated Test Units ScaleStandard Speed Alarms 1 Second Display Name Register Disturbance Monitoring 1/2 Cycle High Speed Alarms 100 msDisplay Name Type Description Operation Standard Speed Alarm TypesDigital Type Description Operation High Speed Disturbance Boolean 102 See Factory Defaults on page 11 of the installation manualAlarm Log Storage 100 Data Logs Alarm LOGAlarm Log Storage April Data Logs 101 MIN/MAX Logs Min/Max Log Interval Min/Max/Average LogLogging 63230-300-212 Min/Max Logs April 102 Maintenance LOG Values Stored in Maintenance LogApril Maintenance Log Interval Min/Max/Average Log Storage Value Stored Description 104 Memory AllocationLogging Memory Allocation Memory allocation in SMS 105 Logging 63230-300-212 Memory Allocation April 106 107 107 Available Resolutions for Disturbance Waveform Captures Types of Waveform CapturesSteady-state Waveform Capture Disturbance Waveform Capture Available Resolutions for Adaptive Waveform Captures Samples per Cycle Max. Duration ResolutionAdaptive Waveform Capture 109 110 100ms rms Event Recording100ms rms Quantities Setting UP the Circuit Monitor for Automatic Event Capture Waveform Storage63230-300-212 Waveform and Event Capture April 111 HOW the Circuit Monitor Captures AN Event 112 Using SMS to gather data when a disturbance event occurs 113114 113 About Disturbance Monitoring April About Disturbance Monitoring 115 116 Operate any output relays when the event is detected Capabilities of the Circuit Monitor During AN Event63230-300-212 Disturbance Monitoring April Categories CM-4000 Onboard Alarms/Events tab Onboard Files tab 119 Understanding the Alarm LOGApril Understanding the Alarm Log Schneider Electric All Rights Reserved Monitor 121Upgrading Memory in the Circuit Monitor 123 124 122 Circuit Monitor Memory Upgrading Memory in the Circuit MonitorApril Circuit Monitor Memory 123 Identifying the Firmware Version Meter InformationXxxxxxxx DOM Representative for assistance TroubleshootingInformation in -1 describes potential problems and their Maintenance and Troubleshooting 63230-300-212 April 126 April Contents About Registers127 Currents and voltages HOW Power Factor is Stored in the Register 128 Table A-2Date and Time Byte Example HOW Date and Time are Stored in the RegisterTable A-1Date and Time Format Register Listing Table A-3Abbreviated Register List April Register Listing Register Description Scale Units Register Range NumberSecond Real-Time Readings 131 132 133 134 Real to Time Minimum Metered Values 135 136 137 138 Real to Time Maximum Metered Values 139 140 To 32,767 See How Power Factor is Stored in the Register on 141 142 143 Accumulated Energy 144 Demand 145 146 147 148 149 150 151 152 153 154 155 156 Phase ExtremesSystem Configuration Current and Voltage Module Configuration 157 = Cvmt 158 Metering Configuration 159 160 161 162 163 164 165 Table A-4Abbreviated Register List for I/O Status Register Name Units Range Description Number 167 Digital Input Template Digital Output Template 169 KWH 171 Analog Input TemplateAnalog Output Template First digit 4 indicates point is analog output Table A-5Registers for Alarm Position Counters 173 174 175 176 177 Table A-6Spectral Components Register Description Units Range NumberTemplate 178 179 180 Issuing Commands 183 Point Numbers Various operations181 181 182 Overview of the Command InterfaceTable B- 1 Location of the command interface Issuing Commands Write the command code to command interface registerTable B- 2 Command Codes 8001-15 Resets April Overview of the Command Interface SetupFiles 185 Point Numbers 186 63230-300-212 Appendix B-Using the Command Interface April 187 188 Command Interface Control Digital Input ControlConditional Energy Using Incremental Energy Incremental EnergyApril Incremental Energy 189 190 Setting UP Individual Harmonic CalculationsTable B- 3 Registers for Harmonic Calculations Changing Scale Factors Schneider Electric All Rights Reserved Glossary 193 194 Potential transformer PT-also known as aGlossary 63230-300-212 April 195 True power factor-seepower factorVoltage transformer VT-seepotential Glossary 63230-300-212 April 196 INDEXNumerics 197 Index 63230-300-212 April 198 PLC 199 SMS 200 201 Index 63230-300-212 April 202 Page PBG 1M 4/2001