Schneider Electric 4000 manual Operation 63230-300-212 Main Menu Overview April

Chapter 3—Operation	63230-300-212
Main Menu Overview	April 2001

MAIN MENU OVERVIEW

		METERS
		Summary
		Power
		Power Quality
		Energy
		Power Demand
		Current Demand
		Custom
		MIN / MAX
		Current
		Voltage
		Frequency
		Power
		Power Factor
		THD
		VIEW ALARMS
		Active Alarms List
		High Priority Log
MAIN MENU
		I/O DISPLAY
	Meters
		Digital Inputs
	Min/Max
		Analog Inputs
	View Alarms
		Digital Outputs
	I/O Display
		Analog Outputs
	Resets
	Setup
	Diagnostics
		RESETS
		Energy
		Demand
		Min/Max
		SETUP
		Date & Time
		Display
		Communications
		Meter
		Alarm
		I/O
		Passwords
		DIAGNOSTICS
		Meter Information
		CVM Information
		Read/Write Regs
		Wiring Error Test

The Main Menu on the display contains the menu options that you use to set up and control the circuit monitor and its accessories and view metered data and alarms. Figure 3–4on the left shows the options on the Main Menu. The menus are briefly described below:

•Meters. This menu lets you view metered values that provide information about power usage and power quality.

•Min/Max. This menu lets you view the minimum and maximum metered values since the last reset of the min/max values with their associated dates and times.

•View Alarms. This menu lets you view a list of all active alarms, regardless of the priority. In addition, you can view a log of high priority alarms, which contains the ten most recent high priority alarms.

•I/O Display. From this menu, you can view the designation and status of each input or output. This menu will only display the I/Os present, so you might not see all of the available menu items if you do not have a particular I/O installed.

•Resets. This menu lets you reset energy, peak demand, and minimum/ maximum values.

•Setup. From this menu, you define the settings for the display such as selecting the date format to be displayed. Creating custom quantities and custom screens are also options on this menu. In addition, use this menu to set up the circuit monitor parameters such as the CT and PT ratios. The Setup menu is also where you define the communications, alarms, I/Os and passwords.

•Diagnostics. From this menu, you can initiate the wiring error test. Also, use this menu to read and write registers and view information about the circuit monitor such as its firmware version and serial number.

Figure 3–4: Menu options on the Main Menu

12 © 2001 Schneider Electric All Rights Reserved