Schneider Electric 4000 manual Register Listing, Table A-3Abbreviated Register List

Appendix A—Abbreviated Register Listing				63230-300-212
Register Listing				April 2001
REGISTER LISTING
Table A–3:Abbreviated Register List
Register	Description	Scale	Units	Register Range
Number		Factor
100 ms Real-Time Readings
1000	Current, Phase A	A	Amps/Scale	0 to 32,767
1001	Current, Phase B	A	Amps/Scale	0 to 32,767
1002	Current, Phase C	A	Amps/Scale	0 to 32,767
1003	Current, Neutral	B	Amps/Scale	0 to 32,767
1004	Current, Ground	C	Amps/Scale	0 to 32,767 ￿
1005	Current, 3-Phase Average	A	Amps/Scale	0 to 32,767
1006	Current, Apparent RMS	A	Amps/Scale	0 to 32,767
1020	Voltage, A-B	D	Volts/Scale	0 to 32,767
1021	Voltage, B-C	D	Volts/Scale	0 to 32,767
1022	Voltage, C-A	D	Volts/Scale	0 to 32,767
1023	Voltage, L-L Average	D	Volts/Scale	0 to 32,767
1024	Voltage, A-N	D	Volts/Scale	0 to 32,767
1025	Voltage, B-N	D	Volts/Scale	0 to 32,767
1026	Voltage, C-N	D	Volts/Scale	0 to 32,767
1027	Voltage, N-G	E	Volts/Scale	0 to 32,767
1028	Voltage, L-N Average	D	Volts/Scale	0 to 32,767 ￿
1040	Real Power, Phase A	F	kW/Scale	-32,767 to 32,767
1041	Real Power, Phase B	F	kW/Scale	-32,767 to 32,767
1042	Real Power, Phase C	F	kW/Scale	-32,767 to 32,767
1043	Real Power, Total	F	kW/Scale	-32,767 to 32,767
1044	Reactive Power, Phase A	F	kVAr/Scale	-32,767 to 32,767
1045	Reactive Power, Phase B	F	kVAr/Scale	-32,767 to 32,767
1046	Reactive Power, Phase C	F	kVAr/Scale	-32,767 to 32,767
1047	Reactive Power, Total	F	kVAr/Scale	-32,767 to 32,767
1048	Apparent Power, Phase A	F	kVA/Scale	-32,767 to 32,767
1049	Apparent Power, Phase B	F	kVA/Scale	-32,767 to 32,767
1050	Apparent Power, Phase C	F	kVA/Scale	-32,767 to 32,767 ￿
1051	Apparent Power, Total	F	kVA/Scale	-32,767 to 32,767
1060	True Power Factor, Phase A	—	0.001	-100 to 1,000 to 100
1061	True Power Factor, Phase B	—	0.001	-100 to 1,000 to 100
1062	True Power Factor, Phase C	—	0.001	-100 to 1,000 to 100
1063	True Power Factor, Total	—	0.001	-100 to 1,000 to 100	￿
1064	Alternate True Power Factor, Phase A	—	0.001	0 to 2,000	￿
See “How Power Factor is Stored in the Register” on page 128.				￿￿

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.

130 © 2001 Schneider Electric All Rights Reserved