Schneider Electric 4000 manual Accumulated Energy, 144

Appendix A—Abbreviated Register Listing	63230-300-212
Register Listing	April 2001

Table A–3:Abbreviated Register List

Register	Description	Scale	Units	Register Range
Number		Factor
1693	Maximum Voltage, Negative Sequence, Angle	—	0.1	0 to 3,599
1694	Maximum Voltage, Zero Sequence, Magnitude	D	Volts/Scale	0 to 32,767
1695	Maximum Voltage, Zero Sequence, Angle	—	0.1	0 to 3,599
1696	Maximum Current, Sequence, Unbalance	—	0.10%	-1,000 to 1,000
1697	Maximum Voltage, Sequence, Unbalance	—	0.10%	-1,000 to 1,000
Accumulated Energy
1700 to 1703	Energy, Real In	—	WH	0 to 9,999,999,999,999,999
1704 to 1707	Energy, Reactive In	—	VArH	0 to 9,999,999,999,999,999
1708 to 1711	Energy, Real Out	—	WH	0 to 9,999,999,999,999,999
1712 to 1715	Energy, Reactive Out	—	VArH	0 to 9,999,999,999,999,999
1716 to 1719	Energy, Real Total (signed/absolute)	—	WH	-9,999,999,999,999,999 to
				9,999,999,999,999,999
1720 to 1723	Energy, Reactive Total (signed/absolute)	—	VArH	-9,999,999,999,999,999-
				9,999,999,999,999,999
1724 to 1727	Energy, Apparent	—	VAH	0 to 9,999,999,999,999,999
1728 to 1731	Energy, Conditional Real In	—	WH	0 to 9,999,999,999,999,999
1732 to 1735	Energy, Conditional Reactive In	—	VArH	0 to 9,999,999,999,999,999
1736 to 1739	Energy, Conditional Real Out	—	WH	0 to 9,999,999,999,999,999
1740 to 1743	Energy, Conditional Reactive Out	—	VArH	0 to 9,999,999,999,999,999
1744 to 1747	Energy, Conditional Apparent	—	VAH	0 to 9,999,999,999,999,999
1748 to 1750	Energy, Incremental Real In, Last Complete Interval	—	WH	0 to 999,999,999,999
1751 to 1753	Energy. Incremental Reactive In, Last Complete Interval	—	VArH	0 to 999,999,999,999
1754 to 1756	Energy, Incremental Real Out, Last Complete Interval	—	WH	0 to 999,999,999,999
1757 to 1759	Energy, Incremental Reactive Out, Last Complete Interval	—	VArH	0 to 999,999,999,999
1760 to 1762	Energy, Incremental Apparent, Last Complete Interval	—	VAH	0 to 999,999,999,999
1763 to 1766	Last Complete Interval Date/Time	—	See template	See template
1767 to 1769	Energy, Incremental Real In, Present Interval	—	WH	0 to 999,999,999,999
1770 to 1772	Energy. Incremental Reactive In, Present Interval	—	VArH	0 to 999,999,999,999
1773 to 1775	Energy, Incremental Real Out, Present Interval	—	WH	0 to 999,999,999,999
1776 to 1778	Energy, Incremental Reactive Out, Present Interval	—	VArH	0 to 999,999,999,999
1779 to 1781	Energy, Incremental Apparent, Present Interval	—	VAH	0 to 999,999,999,999
1782 to 1784	Energy, Reactive, Quadrant 1	—	VArH	0 to 999,999,999,999
1785 to 1787	Energy, Reactive, Quadrant 2	—	VArH	0 to 999,999,999,999
1788 to 1790	Energy, Reactive, Quadrant 3	—	VArH	0 to 999,999,999,999
1791 to 1793	Energy, Reactive, Quadrant 4	—	VArH	0 to 999,999,999,999
1794	Conditional Energy Control Status	—	—	0 = OFF
				1 = ON

See “How Power Factor is Stored in the Register” on page 128.

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.

144 © 2001 Schneider Electric All Rights Reserved