Schneider Electric 4000 manual 151

63230-300-212	Appendix A—Abbreviated Register Listing
April 2001	Register Listing

Table A–3:Abbreviated Register List

Register	Description	Scale	Units	Register Range
Number		Factor
2086	Present Demand Voltage B-N	D	Volts/Scale	0 to 32,767
2087	Running Average Demand Voltage B-N	D	Volts/Scale	0 to 32,767
2088	Maximum Demand Voltage B-N	D	Volts/Scale	0 to 32,767
2089 to 2092	Maximum Demand Date/Time Voltage B-N	—	See Template	See Template
2093	Minimum Demand Voltage B-N	D	Volts/Scale	0 to 32,767
2094 to 2097	Minimum Demand Date/Time Voltage B-N	—	See Template	See Template
2100	Last Demand Voltage C-N	D	Volts/Scale	0 to 32,767
2101	Present Demand Voltage C-N	D	Volts/Scale	0 to 32,767
2102	Running Average Demand Voltage C-N	D	Volts/Scale	0 to 32,767
2103	Maximum Demand Voltage C-N	D	Volts/Scale	0 to 32,767
2104 to 2107	Maximum Demand Date/Time Voltage C-N	—	See Template	See Template
2108	Minimum Demand Voltage C-N	D	Volts/Scale	0 to 32,767
2109 to 2112	Minimum Demand Date/Time Voltage C-N	—	See Template	See Template
2115	Last Demand Voltage N-G	E	Volts/Scale	0 to 32,767
2116	Present Demand Voltage N-G	E	Volts/Scale	0 to 32,767
2117	Running Average Demand Voltage N-G	E	Volts/Scale	0 to 32,767
2118	Maximum Demand Voltage N-G	E	Volts/Scale	0 to 32,767
2119 to 2122	Maximum Demand Date/Time Voltage N-G	—	See Template	See Template
2123	Minimum Demand Voltage N-G	E	Volts/Scale	0 to 32,767
2124	Minimum Demand Date/Time Voltage N-G	—	See Template	See Template
2130	Last Demand Voltage L-N Average	D	Volts/Scale	0 to 32,767
2131	Present Demand Voltage L-N Average	D	Volts/Scale	0 to 32,767
2132	Running Average Demand Voltage L-N Average	D	Volts/Scale	0 to 32,767
2133	Maximum Demand Voltage L-N Average	D	Volts/Scale	0 to 32,767
2134	Maximum Demand Date/Time Voltage L-N Average	—	See Template	See Template
2138	Minimum Demand Voltage L-N Average	D	Volts/Scale	0 to 32,767 ￿
2139 to 2142	Minimum Demand Date/Time Voltage L-N Average	—	See Template	See Template ￿
	Last Demand Real Power, 3-Phase Total
2150	3-Phase total present real power demand for last completed	F	kW/Scale	-32,767 to 32,767
	demand interval, updated every sub-interval
2151	Present Demand Real Power, 3-Phase Total	F	kW/Scale	-32,767 to 32,767
2152	Running Average Demand Real Power, 3-Phase Total	F	kW/Scale	-32,767 to 32,767

See “How Power Factor is Stored in the Register” on page 128.

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.

© 2001 Schneider Electric All Rights Reserved 151