Schneider Electric 4000 manual Options for Custom Quantities, Option Available Values Default

Chapter 3—Operation	63230-300-212
Configuring the Circuit Monitor Using The Setup Menu	April 2001

In this example, we selected Custom Quantity 1. Table 3–8shows the available values.

Custom Quantity 1

Lbl:

Register 1,000

Scale 1,000

Format Integer

6.Use the arrow buttons to scroll to the menu option you want to change.

7.Press the enter button to select the value. The value begins to blink. Use the arrow buttons to scroll through the available values. Then, press the enter button to select the new value.

8.Use the arrow buttons to scroll through the other options on the menu, or if you are finished, press the menu button to save.

Table 3–8: Options for Custom Quantities

Option	Available Values	Default
Lbl	Name of the quantity up to 10 characters. Press the arrow
	buttons to scroll through the characters. To move to the
	next option, press the menu button.
Register	4- or 5-digit number of the register in which the quantity	1,000
	exists.
Scale	Multiplier of the register value can be one of the following:	1,000
	.001, .01, .1, 1.0, 10, 100 or 1,000. See “Scale Factors” on
	page 91 for more information.
Format	Integer	Integer
	D/T—date and time
	MOD10L4—Modulo 10,000 with 4 registers
	MOD10L3—Modulo 10,000 with 3 registers
	MOD10L2—Modulo 10,000 with 2 registers￿
	Label

Modulo 10,000 ￿is used to store energy. See the SMS online help for more.

￿￿Use the Label format only when a label has been defined with no corresponding register.

An asterisk (*) next to the quantity indicates that the quantity has been added to the list.

9. To save the changes to the Display Setup screen, press the menu button.

The custom quantity is added to the Quantities List in the Custom Screen Setup. The new quantity appears at the end of this list after the standard quantities. After creating the custom quantity, you must create a custom screen to be able to view the new quantity.

30 © 2001 Schneider Electric All Rights Reserved