Schneider Electric 4000 - page 23

63230-300-212 Chapter3—Operation
April 2001 Operatingthe Display
11
© 2001 Schneider Electric All Rights Reserved
This sectionexplains a few conventions that were developedto streamline
instructionsin this chapter.Figure 3–3 shows the parts of a menu.
Figure 3–3: Parts of a menu
Eacht ime youread “sel ect”in thismanual, choose the option from the menu
by doing this:
1. Pr essthe arrows to highlight themenu option.
2. Pr essthe enter button to select that option.
Tochange a value, the procedureis the same on every menu:
1. Use t he arrowbuttons to scrollt o them enuoption you want to
change.
2. Press the enter button to select the value. The value begins to blink.
3. Press the arrow buttons to scroll through the possible values.To select
the new value,press the enter button.
4. Pr essthe arrow buttons to move up and down the menu options.You can
change one valueor all of the values on a menu. To save thechanges,
press the menubutton until thecircuit monitor displays:
“Savechanges? No”
NOTE: Pressingthe menu button while a value is blinking will return that
value to its mostcurrent setting.
5. Pr essthe arrow to change to “Ye s , ”then press the enter button to save
the changes.
Display Menu Conventions
Menu
Menu Option
Value
DISPLAY
Language English
Date MM/DD/YYYY
Time Format 2400hr
VFD Sensitivity 3
Display Timer 1 Min
Custom Quantity
Custom Screen
Selecting a Menu Option
Changinga Value