Schneider Electric 4000 manual About Registers, 127, Currents and voltages, April Contents

63230-300-212	Appendix A—Abbreviated Register Listing
April 2001	Contents

APPENDIX A—ABBREVIATED REGISTER LISTING

	This appendix contains information about the registers of the circuit monitor.
CONTENTS	CONTENTS	127
	ABOUT REGISTERS	127
	HOW POWER FACTOR IS STORED IN THE REGISTER	128
	HOW DATE AND TIME ARE STORED IN THE REGISTER	129
	REGISTER LISTING	130
ABOUT REGISTERS	The four tables in this appendix contain an abbreviated listing of circuit
	monitor registers:
	• Table A–3,beginning on page 130, identifies registers for these values:
	— Real-Time Metered Values including 100 ms and 1 second
	— Power Quality
	— Minimum Real-Time Meter Values
	— Maximum Real-Time Meter Values
	— Accumulated Energy Values
	— Demand Values
	— Phase Extremes
	— System Configuration
	— Current and Voltage Module (CVM) Configuration
	— Metering Configuration
	— Communications
	• Table A–4 on page 166 lists the register numbers related to the set up of
	inputs and outputs.
	• Table A–5 on page 173 identifies the alarm position register numbers.
	• Table A–6 on page 178 lists the registers used for the individual per-phase
	harmonic magnitudes and angles through the 63rd harmonic for all
	currents and voltages.

© 2001 Schneider Electric All Rights Reserved 127