Schneider Electric 4000

Appendix A—Abbreviated Regist er Listing 63230-300-212

156

2620to 2639 GenericChannel #12

Sameas registers 2400 to 2419except for Channel#12

2640to 2659 GenericChannel #13

Sameas registers 2400 to 2419except for Channel#13

2660to 2679 GenericChannel #14

Sameas registers 2400 to 2419except for Channel#14

2680to 2699 GenericChannel #15

Sameas registers 2400 to 2419except for Channel#15

2700to 2719 GenericChannel #16

Sameas registers 2400 to 2419except for Channel#16

2720to 2739 GenericChannel #17

Sameas registers 2400 to 2419except for Channel#17

2740to 2759 GenericChannel #18

Sameas registers 2400 to 2419except for Channel#18

2760to 2779 GenericChannel #19

Sameas registers 2400 to 2419except for Channel#19

2780to 2799 GenericChannel #20

Sameas registers 2400 to 2419except for Channel#20

Phase Extremes

2800 Current, H ighest Phase Value A Amps/S cale 0 to 32,76 7

2801 Current,Lowest Phase Value A Amps/Scale 0 to 32,767

2802 Voltage,L-L, HighestValue D Volts/Scale 0 to 32,767

2803 Voltage, L-L, Lowest Value D Volts/Scale 0 to 3 2,767

2804 Voltage, L-N, Hi ghest Value D Volts/Scale 0 to 32,767

2805 Voltage,L-N, LowestValue D Volts/Scale 0to 32,767

SystemConfiguration

3000–3001 CircuitMonitor Label ———

3002–3009 CircuitMonitor Nameplate ———

3014 CircuitMonitor Present OperatingSystem FirmwareVersion ——0x0000 to 0xFFFF

3034–3037 PresentDate/Time —See Template See Template

3039-3042 Last Unit Restart Date/Time —See Template See Template

Tabl e A–3:AbbreviatedRegister List

Number Description Scale

Factor Units Register Range

See “How Power Factor is Stored in t he Register”on page 128.

Thealternate storage methodfor power factor(PF) is useful for outputtingPF on analog outputs.The PF valueis stored as a positivevalue

between0 and 2,centered around1 (unity). A valueof 0 lagging mapsto 0; -0.999 mapsto 0.999;0.999 leadingmaps to 1.001;and 0 leading

mapsto 2. The alternate PF is alsostored with a scale factor0.001.

Theseconfiguration registersrequire that youenter the setup mode to change the register’scontents. Issuecommand 9020 to enter setup

mode and 9021 to exit setup mode. See “Us ing the Command Interface to Cha nge Configuration Regist ers”on page 187 for instruction s on

howtousethesetup-modecommands.

Quantity available for 4- wire system only. Value set to - 32,768 if not available.