Schneider Electric 4000 manual Real to Time Maximum Metered Values, 139

© 2001 Schneider Electric All Rights Reserved

63230-300-212	Appendix A—Abbreviated Register Listing
April 2001	Register Listing

Table A–3:Abbreviated Register List

Register	Description	Scale	Units	Register Range
Number		Factor
1466	Minimum Distortion Power, Phase C	F	kW/Scale	-32,767 to 32,767
1467	Minimum Distortion Power, Total	F	kW/Scale	-32,767 to 32,767 ￿
1468	Minimum Distortion Power Factor, Phase A	—	0.10%	0 to 1,000
1469	Minimum Distortion Power Factor, Phase B	—	0.10%	0 to 1,000
1470	Minimum Distortion Power Factor, Phase C	—	0.10%	0 to 1,000 ￿
1471	Minimum Distortion Power Factor, Total	—	0.10	0 to 1,000
1474	Minimum Harmonic Current, Phase A	A	Amps/Scale	0 to 32,767
1475	Minimum Harmonic Current, Phase B	A	Amps/Scale	0 to 32,767
1476	Minimum Harmonic Current, Phase C	A	Amps/Scale	0 to 32,767
1477	Minimum Harmonic Current, Neutral	B	Amps/Scale	0 to 32,767
1478	Minimum Harmonic Voltage, A-N/A-B	D	Volts/Scale	0 to 32,767 ￿
1479	Minimum Harmonic Voltage, B-N/B-C	D	Volts/Scale	0 to 32,767
1480	Minimum Harmonic Voltage, C-N/C-A	D	Volts/Scale	0 to 32,767
1481	Minimum Total Demand Distortion	—	0.01	0 to 10,000
1484	Minimum Current, Positive Sequence, Magnitude	A	Amps/Scale	0 to 32,767
1485	Minimum Current, Positive Sequence, Angle	—	0.1	0 to 3,599
1486	Minimum Current, Negative Sequence, Magnitude	A	Amps/Scale	0 to 32,767
1487	Minimum Current, Negative Sequence, Angle	—	0.1	0 to 3,599
1488	Minimum Current, Zero Sequence, Magnitude	A	Amps/Scale	0 to 32,767
1489	Minimum Current, Zero Sequence, Angle	—	0.1	0 to 3,599
1490	Minimum Voltage, Positive Sequence, Magnitude	D	Volts/Scale	0 to 32,767
1491	Minimum Voltage, Positive Sequence, Angle	—	0.1	0 to 3,599
1492	Minimum Voltage, Negative Sequence, Magnitude	D	Volts/Scale	0 to 32,767
1493	Minimum Voltage, Negative Sequence, Angle	—	0.1	0 to 3,599
1494	Minimum Voltage, Zero Sequence, Magnitude	D	Volts/Scale	0 to 32,767
1495	Minimum Voltage, Zero Sequence, Angle	—	0.1	0 to 3,599
1496	Minimum Current, Sequence, Unbalance	—	0.10%	-1,000 to 1,000
1497	Minimum Voltage, Sequence, Unbalance	—	0.10%	-1,000 to 1,000
Real to Time Maximum Metered Values
1500	Maximum Current, Phase A	A	Amps/Scale	0 to 32,767
1501	Maximum Current, Phase B	A	Amps/Scale	0 to 32,767
1502	Maximum Current, Phase C	A	Amps/Scale	0 to 32,767
1503	Maximum Current, Neutral	B	Amps/Scale	0 to 32,767

See “How Power Factor is Stored in the Register” on page 128.

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.￿

139