SVP1600 Stereo Bass Power Amplifier
Technical Specifications
OUTPUT POWER RATING | 1600 Watts |
| 1200 Watts |
| 2 x 900 Watts @ 2 Ohms (600 Watts Continuous) |
| 2 x 625 Watts @ 4 Ohms (490 Watts Continuous) |
| 2 x 350 Watts @ 8 Ohms (300 Watts Continuous) |
|
|
FREQUENCY RESPONSE | |
|
|
TOTAL HARMONIC DISTORTION | 5% @ full power |
|
|
SLEW RATE | > 30V/µs (stereo) |
|
|
SIGNAL TO NOISE RATIO | > 90dB typical |
|
|
INPUT IMPEDANCE | 220k ohm |
|
|
INPUT SENSITIVITY | 0.5V RMS |
|
|
DAMPING FACTOR | > 300 |
|
|
OUTPUT CONNECTIONS | (2) 1/4” phone jacks, (1) Speakon® per channel; (1) Speakon® for Mono Bridge |
|
|
PROTECTION CIRCUITRY | |
|
|
COOLING | Internal fan |
|
|
POWER REQUIREMENTS | 120VAC, 60Hz, 1.4kVA |
| 100/115VAC 50/60Hz, 1.4kVA |
| 240VAC, 50/60Hz, 1.4kVA |
|
|
SIZE AND WEIGHT | 19/17.4”W x 5.6”H (with feet) x 15.5”D; 39 lbs |
|
|
Declaration Of Conformity
#32, Effective
Manufacturer’s Name: | SLM Electronics | |
Production Facility: | 1901 | Congressional Drive, St. Louis, MO 63146, USA |
Production Facility: | 700 Hwy 202 W, Yellville, AR 72687, USA | |
Shipping Facility: | 1400 | Ferguson Ave., St. Louis, MO 63133, USA |
Office Facility: | 1400 | Ferguson Ave., St. Louis, MO 63133, USA |
Product Type: | Audio Amplifier | |
Complies with the following Standards: |
| |
Safety: | EN60065, E60065, C22.2, UL6500 and/or UL813 | |
EMC: | Directive 89/336/EEC, EN55103, EN55013, EN61000, | |
| and/or FCC 47CFR 15B clA | |
Supplementary information provided by: SLM Electronics - R & D Engineering
1901 Congressional Drive, St Louis, MO 63146, USA
Tel.:
Ampeg reserves the right to change specifications without notice.
www.ampeg.com
Ampeg is proudly Made in America. ©2003 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
P/N
