SVP1600 Stereo Bass Power Amplifier
Operation: Mono Bridge Mode:
7 | 43565 | 15531SVP16009 SVP1600 |
| |
| (21) | SERIAL# BMCDN20083 |
| |
Line: 120V Freq: 60 | Pwr: 1.4kVA |
| ||
|
|
| IN |
|
|
|
| MONO | FROM PREAMP OR |
|
|
| BRIDGE | EFFECT'S OUTPUT |
|
|
|
|
NOTE: THE SPEAKER CABINET(S) MUST BE ABLE TO HANDLE THE EXTREMELY HIGH POWER OUTPUT OF THE MONO BRIDGED AMPLIFIER
HIGH POWER CABINET(S)
4OHMS MINIMUM
Set the Stereo/Dual Mono / Mono Bridge switch to the Mono Bridgel position (switch in/depressed).
Connect a shielded signal cable from the Output of your Preamp or Effect to the Power Amp A Power Amp Input jack. Connect a speaker cable from the SVP1600’s Mono Bridge Speaker Output jack to the input jack(s) of the speaker(s).
NOTE: The Speakon® cable must be wired as follows: 1+ = hot, 2+ = return.
Operation: Dual Mono Mode:
7 | 43565 | 15531SVP16009 SVP1600 |
| (21) | SERIAL# BMCDN20083 |
Line: 120V Freq: 60 Pwr: 1.4kVA | ||
|
| OUT |
STEREO/
DUAL MONO
CABINET(S)
2 OHMS MINIMUM
CABINET(S)
2 OHMS MINIMUM
FROM PREAMP OR EFFECT'S OUTPUT
Set the Stereo/Dual Mono / Mono Bridge switch to the Stereo/Dual Mono position (switch out).
Connect a shielded signal cable from the Output of your Preamp or Effect to the Power Amp A Power Amp Input jack.
Connect a speaker cable from the SVP1600’s Power Amp A Speaker Output jack to the input jack(s) of one (set) of the speakers. Connect a speaker cable from the SVP1600’s Power Amp B Speaker Output jack to the input jack(s) of the other speaker(s).
NOTE: The Speakon® cable must be wired as follows: 1+ = hot, 1- = ground.
6